Stream Amcrest 4K AI Turret with Built-in Mic to IDrive e2
4K Smart AI Turret with audio stream and instant offsite FTP motion recording. Follow our step-by-step setup guide below to stream footage directly to IDrive e2 via FTP/S with Rilavek as the pipe — zero on-prem NVR required.
Your Amcrest IP8M-2796EB-AI uploads footage offsite in real time directly to IDrive e2. Intruders cannot steal or destroy evidence by seizing on-prem recorder hardware.
Store Amcrest IP8M-2796EB-AI recordings in IDrive e2 on your own terms. Apply automated bucket lifecycle rules to roll over or archive clips after 30, 90, or 365 days.
Rilavek ingests native FTP/S streams from your Amcrest IP8M-2796EB-AI and writes them directly to IDrive e2 via multipart S3 PUTs with zero disk writes.
How to Stream Amcrest 4K AI Turret with Built-in Mic to IDrive e2
Follow these 6 steps to provision your object storage, configure Rilavek’s Data Store, Sender, and Ingestion Pipe, enter your camera firmware settings, and establish automated S3 retention rules.
Set Up Your 
IDrive e2 Bucket & Generate API Keys
Configure your target bucket and API credentials inside IDrive e2 so Rilavek can stream motion clips and continuous video directly into your storage.
- In the IDrive e2 Dashboard, create a private storage bucket.
- Navigate to Access Keys > Create Access Key.
- Assign Read/Write permissions restricted to your surveillance bucket.
- Copy your Access Key ID, Secret Key, and regional S3 endpoint URL.
Add Your Data Store in Rilavek
In your Rilavek dashboard, navigate to Data Stores > New Data Store, select your provider, and enter your S3 credentials. Rilavek verifies the connection with an automated write-probe before saving.
Add New Data Store
Create a Camera Sender in Rilavek
Go to Senders in the Rilavek sidebar and click New Sender. A Sender represents the hardware identity of your Amcrest 4K AI Turret with Built-in Mic and generates a dedicated device-level password.
Create New Sender
Must be at least 6 characters, lowercase, start with a letter/underscore, and contain only letters, numbers, hyphens, or underscores.
Secure credentials will be automatically generated for this sender.
Sender Credentials
Create & Configure Your Ingestion Pipe in Rilavek
Go to Pipes in the sidebar and click Create Pipe. Configure the 4 core sections of your pipeline: General (Pipe ID), Inputs (FTP), Access Control (Sender permission), and Destinations (Data Store).
1General Settings (Pipe ID)
Every pipeline in Rilavek is assigned an immutable, globally unique Pipe ID (e.g. p_cctv9x). This ID acts as an isolated ingestion channel that segregates audit logs, real-time transfer metrics, and storage routing. It also forms the second half of your scoped camera FTP login username (username@p_cctv9x).
Pipe ID
Use this ID to identify this pipe in logs. Combine it with the sender username for complete authentication details.
2Inputs (FTP / FTPS Ingress)
The Inputs configuration defines how camera files enter Rilavek. Enabling the FTP Ingress input provides a persistent, high-availability ingestion server (ftp.rilavek.com) compatible with active and passive FTP modes, explicit TLS negotiation, and standard CCTV firmware video push routines.
Inputs
Enable inputs to receive data.
FTP Ingress
Endpoint enabled. Connect using your Sender credentials.
Example: cam_ip8m2796ebai@p_cctv9x
Use the password configured for the specific Sender.
3Access Control (Sender Authorization)
Access Control prevents unauthorized uploads by enforcing a zero-trust boundary on the ingestion pipe. Only explicitly authorized Senders (such as Amcrest 4K AI Turret with Built-in Mic) can authenticate and stream video into this pipe. Any requests with unassigned credentials are rejected at the network edge.
Access Control
Restricts who can upload to this pipe.
Individual Senders
Grant or revoke pipe access for specific individual senders.
4Destinations (Target Cloud Storage Routing)
The Destinations section routes video clips to your target cloud storage provider. Linking your configured Data Store routes all received footage directly to your IDrive e2 bucket (cctv-amcrest-recordings). Video files are committed on-the-fly via parallel multipart S3 PUTs without intermediate disk caching.
Destinations
This is where we send your files to.
Configure FTP, Motion Detection & Linkage Method in Amcrest 4K AI Turret with Built-in Mic Firmware
Open your camera's web configuration page in your browser at its local LAN IP address and complete the steps below:
Step 5AConfigure FTP Streaming Credentials
Click Setup > Storage > Destination > FTP.
Turn on the 'Enable' checkbox, then enter your Rilavek Ingestion Gateway server address, port 21, scoped username, device password, and remote directory. Click Save as indicated by the red annotations below.
cam_ip8m2796ebai@p_cctv9x (SenderUsername@PipeID).Step 5BConfigure Upload Schedule (Snapshot & Record Schedule)
Click Setup > Storage > Schedule.
Select the Record Schedule tab, then ensure your schedule grid has Yellow (Motion) and Red (Alarm) periods configured across the weekly timeline so the camera uploads footage during active surveillance windows.
Amcrest IP cameras only upload files during times marked on the schedule matrix. Highlight periods in Yellow (Motion) and Red (Alarm) for motion-triggered snapshot and video clip upload into your Rilavek Ingestion Gateway.
Step 5CEnable FTP Destination in Storage Path (Linkage Routing)
Click Setup > Storage > Destination > Path.
Check the "FTP" checkboxes under Scheduled, Motion Detect, and Alarm for Record and Snapshot. In Amcrest firmware, FTP storage must be explicitly activated in this Path table for files to upload to Rilavek.
| Event Type | Scheduled | Motion Detect | Alarm |
|---|---|---|---|
| SD Card | |||
| FTP | |||
| NAS |
| Event Type | Scheduled | Motion Detect | Alarm |
|---|---|---|---|
| SD Card | |||
| FTP | |||
| NAS |
In Amcrest IP camera firmware, you must check the "FTP" boxes under Scheduled and Motion Detect in this Path destination matrix. If these boxes remain unchecked, the camera will record events locally to SD card/NVR storage, but will never forward snapshots or video clips to your Rilavek FTP Ingestion Gateway even if the credentials under the FTP tab test 100% successfully.
Verify Ingestion
Click Test in your camera's FTP settings or trigger a test recording transfer. In your Rilavek dashboard, navigate to Pipes > your pipeline > Transfers tab to inspect incoming files as video clips stream into IDrive e2.
| FILE | SENDER | SIZE | DATE | STATE |
|---|---|---|---|---|
amcrest/ip8m-2796eb-ai/2026-09-10/ch01_143000.mp4 | cam_ip8m2796ebai | 18.4 MB | Sep 10, 14:30 | Success |
amcrest/ip8m-2796eb-ai/2026-09-10/ch01_142500.mp4 | cam_ip8m2796ebai | 21.2 MB | Sep 10, 14:25 | Success |
amcrest/ip8m-2796eb-ai/2026-09-10/ch01_142000.mp4 | cam_ip8m2796ebai | 19.7 MB | Sep 10, 14:20 | Success |
Common questions
Does the Amcrest 4K AI Turret with Built-in Mic require an on-site NVR to stream to IDrive e2?
No. The Amcrest 4K AI Turret with Built-in Mic has built-in FTP client firmware. It connects directly to Rilavek's cloud bridge on port 21, streaming video chunks into your IDrive e2 bucket without requiring a local NVR or PC.
How does retention work on IDrive e2?
You define exact retention policies (e.g. 30, 90, or 365 days) directly in your IDrive e2 bucket using standard S3 Lifecycle expiration rules. Footage is never auto-overwritten by proprietary cloud caps.
What happens if my internet connection drops?
If your IP8M-2796EB-AI has a local MicroSD card installed, it records motion events locally and retries the FTP upload once connectivity is restored.
Stream Amcrest 4K AI Turret with Built-in Mic to IDrive e2
Create your free Rilavek ingestion pipe in seconds. No NVR hardware, no proprietary camera cloud subscriptions, and 100% data ownership in your private storage bucket.
Free plan includes 10GB of transfer. No credit card required.